A na-eji ụgbọ mmiri eji emejupụta nke PVC kpuchie malded. O nwere mkpuchi ntụ ntụ PVC nke eji arụ ọrụ site na igwe igwe. A na-etinyekarị mkpuchi plastik dị mma na waya a na-echebe ya na nrapado siri ike nke na-eme ka ịdịte ike nke waya. PVC CodDed Wire welpded waya dị mma dị mma maka ogige mbara, ndị nche osisi, ókè-ala, na-akwado ihe ọkụkụ. The PVC a na-ewepụta waya na-apụta na-eguzogide ma emepụta ya site na waya nke a na-eme ka ọ bụrụ ihe mkpuchi na-acha uhie uhie, na-eji mkpuchi mkpuchi na-acha odo odo na-acha akwụkwọ ndụ. Ntinye PVC nke dị dị ka abụọ mpịakọta na ogwe, dịkwa na agba dị iche iche dị ọcha, ojii, akwụkwọ ndụ akwụkwọ ndụ wdg.
| Nha nha | Wire Dia tupu & mgbe PVC CHARE | ||
| Na mm | Nha nha | Tupu kootu | Kechie mkpuchi |
| 6.4mm | 1/4 inch | 0.56- 0.71mm | 0.90- 1.05mm |
| 9.5mm | 3/8 inch | 0.64 - 1.07mm | 1.00 - 1.52mm |
| 12.7mmm | 1/2 inch | 1.10 - 2.20mm | |
| 15.9mm | 5/8 inch | 0.81 - 1.65mm | 1.22 - 2.30mm |
| 19.1.1mm | 3/4 inch | 0.81 - 1.65mmm | |
| 25.4 × 12.7mm | 1 × 1/2 inch | 0.81 - 1.65mm | 1.24 - 2.422mm |
| 25.4mm | 1 inch | 0.81 - 2.11mm | 1.28 - 2.90mm |
| 38.1mm | 1 1/2 inch | 1.07 - 2.11mm | 1.57 - 2.92mm |
| 25.4 × 50.8mm | 1 × 2 inch | 1.47 - 2.11mm | 2.00 - 2.95mm |
| 50.8mm | 2 inch | 1.65 - 2.77mm | 2.20 - 3.61mm |
| 76.2mm | 1.90 - 3.50mm | 2.50 - 4.36mm | |
| 101.6mm | 4 inch | 2.20 - 4.00mm | 2.85 - 4.88mm |
| Obosara obosara | 0.5m-2.5m, dika ariri. | ||
| Nyefee ogologo | 10M, 15m, 20m, 25m, 30m, 30.5m, dika arịrịọ si kwuo. | ||
Oge Post: Mee-17-2023